Macht Schnell x BMC Stage 1 Air Intake Charge Kit Bundle for BMW M3 M4 F80 F82 S55

Kit Contents:

Macht Schnell Intake Scoops
BMC Performance Air Filter

Factory BMW intake systems are well known to be very efficient. The Macht Schnell Intake Charge Scoops (ICS) assist in air delivery by diverting cold, fresh air from behind the kidney grilles into the airbox, with a noticeable power gain found at higher speeds on vehicles equipped with our High Performance Filters. The ICS pieces are constructed from nearly indestructible steel, powdercoated, and will not bend, distort or rust after years of use.

The inside of the ICS pieces have a smooth transition with a gloss powdercoated finish to direct airflow into the intakes, while giving an overall aggressive appearance.

Features:
- Aids in additional airflow to factory airbox, additional gains when combined with High Performance Filters
- Available in 5 colors: Red, Black, Blue, Orange, Yellow
- Quick installation for DIY type
- Steel construction with powdercoated exterior, nearly indestructible
- Elegant textured exterior, smooth gloss inner for maximum air delivery with no restriction
- Will not rust, or deteriorate over time - Sold as a set

BMC Air Filter suits BMW M3 M4 F80 F82

The panel / cylindrical air filter is commonly referred to as "replacement air filter". It is installed in the vehicle's original airbox to replace the OEM air filter. It is made of highly performing materials that allow an increased air flow combined with a more efficient filtration, guaranteeing containment of all impurities from as small as 7 microns (compared to OEM's 10 microns).

Air flow chart for a sample BMC air filter against an OEM paper filter
Temperature 25C° - Humidity 25% - Pressure 1020mbar
Test ran with oem airbox, and the related air flow constrictions.
This chart has a pure illustrative purpose and does not refer to the present filter.

BMC air filters are produced using a "Full Moulding" system that enables the characteristic red filter to be realized from a single mould with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes.

BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.

All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit.

For any other info, please see the FAQ page.

COMPATABILITY

BMW

3 (F30/F31/F80) M3 "30 JAHRE" [FULL KIT]	HP 450	YEAR 2016	CHASSIS F80
3 (F30/F31/F80) M3 [FULL KIT]	HP 431	YEAR 14 > 19	CHASSIS F80
3 (F30/F31/F80) M3 CS [FULL KIT]	HP 460	YEAR 2018	CHASSIS F80
4 (F30/F31/F80) M3 COMPETITION [FULL KIT]	HP 450	YEAR 16 >	CHASSIS F80
4 (F32/F33/F36/F82) M4 [FULL KIT]	HP 431	YEAR 14 > 19	CHASSIS F82/F83
4 (F32/F33/F36/F82) M4 COMPETITION [FULL KIT]	HP 450	YEAR 16 >	CHASSIS F82/F83
4 (F32/F33/F36/F82) M4 CS [FULL KIT]	HP 460	YEAR 17 > 18	CHASSIS F82
4 (F32/F33/F36/F82) M4 GT4 [FULL KIT]	HP 431	YEAR 2018	CHASSIS F82
4 (F32/F33/F36/F82) M4 GTS [FULL KIT]	HP 500	YEAR 16 > 17	CHASSIS F82

Air Intakes

تبين12243648

المحدد

Macht Schnell x BMC Stage 1 Air Intake Charge Kit for BMW M3 M4 F80 F82 S55

HK$2,632.00

Search

Search for products, pages, or news

تبين