{"title":"bootmod3 Flex Fuel Kits","description":"","products":[{"product_id":"bootmod3-flex-fuel-kit-canbus-enabled-ethanol-content-analyzer-eca","title":"bootmod3 Flex Fuel Kit for S55 BMW M3 F80 M4 F82 M2 Competition F87 - CANBUS Ethanol Content Analyzer (ECA)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv itemprop=\"offers\" itemscope=\"\" itemtype=\"http:\/\/schema.org\/Offer\"\u003e\n\u003cdiv class=\"rte\" itemprop=\"description\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003ch4\u003eBOOTMOD3 Flex Fuel Kit for N55 BMW M2 F87 M135i F20 M235i F22 335i F30 435i F32 - CANBUS Enabled Ethanol Content Analyzer (ECA)\u003c\/h4\u003e\n\u003ch1\u003eFLEX FUEL \u0026amp; FLEX MAPS WITH bootmod3\u003c\/h1\u003e\n\u003ch3\u003eKIT CONTENTS: \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x bootmod3 Flex Fuel Kit\u003c\/li\u003e\n\u003cli\u003e1x Continental Ethanol Content Sensor (Optional)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eWe are proud to bring out this truly awesome product that makes getting the required Flex Fuel hardware on your BMW and A9X Supra with incredible ease and minimal effort, in your own driveway.\u003c\/p\u003e\n\u003cp\u003eOur kit is entirely plug and play with the factory vehicle harness. No cutting, splicing of OEM wiring\/connectors. It installs in minutes and can be removed without a trace on the car!\u003c\/p\u003e\n\u003cp\u003eOur team used SolidWorks to design a Flow Optimized Flex Fuel Sensor Adapter (FFSA) to ensure fuel flow is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eunobstructed \u003c\/strong\u003eand with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eno added pressure drop\u003c\/strong\u003e at full fuel pump flow from the fuel tank to your motor when our kit is installed. This is important when pushing the factory fuel system with all the power Ethanol can provide over petrol!\u003c\/p\u003e\n\u003cp\u003eFlex fuel sensor housing is designed to neatly install into the factory BMW fuel hat location.\u003c\/p\u003e\n\u003cp\u003eFlex Fuel Sensor Adapter also contains\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003etwo 1\/8 NPT ports that allow installation of an auxiliary Fuel Pressure sensor\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor vehicles that don’t come with an OEM one from the factory for future use. Depending on fitment, either port can be used.\u003c\/p\u003e\n\u003cp\u003eInstall the bootmod3 Flex Fuel Plug and Play Kit and flash your flex fuel enabled bootmod3 OTS MultiMap or Custom Map in minutes and you’re off to the races never worrying about alcohol\/petrol blend % in your fuel tank. It does not get better or easier than this!\u003c\/p\u003e\n\u003cp\u003ebootmod3 FlexFuel Plug and Play Kit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMinutes to install at home as opposed to hours at a shop with car up on lift fabricating\/cutting into factory fuel lines and splicing\/cutting\/pinning into OEM electrical\u003c\/li\u003e\n\u003cli\u003e4+ hours in time\/cost savings to get going on Flex Fuel as compared to most other kits that require making custom fuel lines, fittings and custom wiring! \u003c\/li\u003e\n\u003cli\u003eFully reversible\/removable and back to stock without a trace in minutes\u003c\/li\u003e\n\u003cli\u003eCustom 3-piece Aluminum-6061 Flex Fuel sensor adapter with built-in sensor bypass to allow for obstruction free fuel flow made to fit in the vehicle factory fuel hat area below the rear seat\u003c\/li\u003e\n\u003cli\u003eAll connecting points sealed with fuel safe Viton o-rings\u003c\/li\u003e\n\u003cli\u003eFlex Fuel Sensor Adapter housing provides additional 1\/8 NPT ports for optional Fuel Pressure sensor addition to vehicles without a factory one for bootmod3 CustomROM v2 support\u003c\/li\u003e\n\u003cli\u003eCANBUS Enabled Ethanol Content Analyzer (ECA) that integrates with bootmod3 CustomROM for complete and seamless conversion of your BMW to FlexFuel for bootmod3 Flex Fuel enabled OTS MultiMaps and custom tunes with your bootmod3 tuner of choice\u003c\/li\u003e\n\u003cli\u003ePower\/CANBus 4-wire plug and play harness\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e100% Fully Plug and Play harness to the BMW Fuel Controller connectors (EKP3) on S55, N55 vehicles\u003c\/li\u003e\n\u003cli\u003e100% Fully Plug and Play harness on the BMW Body Domain Controller (BDC\/FEM) connector on Gen1 F-series B48\/B58\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eContinental Flex Fuel sensor 3-wire harness\u003c\/li\u003e\n\u003cli\u003eCustom Aluminum-6061 CANBus Enclosure for the bootmod3 ECA board\u003c\/li\u003e\n\u003cli\u003eCustom, kink-free teflon braided line allowing plug and play installation with the OEM fuel hat and factory 5\/16” or 3\/8” fuel feed line. No cutting or new lines required.\u003c\/li\u003e\n\u003cli\u003e-6 AN fitting by Racetronix\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/bootmod3.atlassian.net\/wiki\/spaces\/BCS\/pages\/2592112641\/bootmod3+Flex+Fuel+Kit+Installation+Instructions\" data-mce-href=\"https:\/\/bootmod3.atlassian.net\/wiki\/spaces\/BCS\/pages\/2592112641\/bootmod3+Flex+Fuel+Kit+Installation+Instructions\" target=\"_blank\"\u003eCLICK HERE for bootmod3 Flex Fuel Installation instructions on the bootmod3 WiKi\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOEM FUEL HAT LOCATION KIT IS INTENDED FOR OEM FUEL PUMP AND ASSOCIATED WIRING. ANY VARIATIONS TO FUEL LINES OR FUEL PUMPS MAY NOT BE COMPATIBLE. USE THE ENGINE BAY INSTALLATION KIT WHERE AVAILABLE INSTEAD.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.protuningfreaks.com\/pages\/terms-and-conditions\" data-mce-href=\"https:\/\/www.protuningfreaks.com\/pages\/terms-and-conditions\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ebootmod3 software and hardware Terms and Conditions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"bootmod3","offers":[{"title":"Pre-Assembled w. Included Continental Flex Fuel Sensor \/ OEM Fuel Hat Location Kit","offer_id":39535465922678,"sku":"BM3-FLX-N55S55-FX-OE","price":1024.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1217\/5090\/files\/mode-auto-concepts-australia-bootmod3-bm3-flex-fuel-kit-for-b48-b58-n20-n26-n55-n63-s55-s58-s63-bmw-1-2-3-4-5-6-7-8-series-m2-m3-m4-m5-m6-m8-x3m-x4m-x5m-x6m-toyota-supra-a90-5_0f38ac07-73e3-43fd-bb68-b4d558dd922f.jpg?v=1753422143"},{"product_id":"bootmod3-bm3-flex-fuel-kit-for-b58-f-series-gen-1-bmw-m140i-f20-m240i-f22-340i-f30-440i-f32-canbus-enabled-ethanol-content-analyzer-eca","title":"bootmod3 Flex Fuel Kit for B58 F-Series BMW M140i F20 M240i F22 340i F30 440i F32 - CANBUS Ethanol Content Analyzer (ECA)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv itemprop=\"offers\" itemscope=\"\" itemtype=\"http:\/\/schema.org\/Offer\"\u003e\n\u003cdiv class=\"rte\" itemprop=\"description\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003ch4\u003ebootmod3 bootmod3 Flex Fuel Kit for B58 F-Series BMW M140i F20 M240i F22 340i F30 440i F32 - CANBUS Enabled Ethanol Content Analyzer (ECA)\u003c\/h4\u003e\n\u003ch1\u003eFLEX FUEL \u0026amp; FLEX MAPS WITH bootmod3\u003c\/h1\u003e\n\u003ch3\u003eKIT CONTENTS: \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x bootmod3 Flex Fuel Kit\u003c\/li\u003e\n\u003cli\u003e1x Continental Ethanol Content Sensor (Optional)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eWe are proud to bring out this truly awesome product that makes getting the required Flex Fuel hardware on your BMW and A9X Supra with incredible ease and minimal effort, in your own driveway.\u003c\/p\u003e\n\u003cp\u003eOur kit is entirely plug and play with the factory vehicle harness. No cutting, splicing of OEM wiring\/connectors. It installs in minutes and can be removed without a trace on the car!\u003c\/p\u003e\n\u003cp\u003eOur team used SolidWorks to design a Flow Optimized Flex Fuel Sensor Adapter (FFSA) to ensure fuel flow is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eunobstructed \u003c\/strong\u003eand with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eno added pressure drop\u003c\/strong\u003e at full fuel pump flow from the fuel tank to your motor when our kit is installed. This is important when pushing the factory fuel system with all the power Ethanol can provide over petrol!\u003c\/p\u003e\n\u003cp\u003eFlex fuel sensor housing is designed to neatly install into the factory BMW fuel hat location.\u003c\/p\u003e\n\u003cp\u003eFlex Fuel Sensor Adapter also contains\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003etwo 1\/8 NPT ports that allow installation of an auxiliary Fuel Pressure sensor\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor vehicles that don’t come with an OEM one from the factory for future use. Depending on fitment, either port can be used.\u003c\/p\u003e\n\u003cp\u003eInstall the bootmod3 Flex Fuel Plug and Play Kit and flash your flex fuel enabled bootmod3 OTS MultiMap or Custom Map in minutes and you’re off to the races never worrying about alcohol\/petrol blend % in your fuel tank. It does not get better or easier than this!\u003c\/p\u003e\n\u003cp\u003ebootmod3 FlexFuel Plug and Play Kit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMinutes to install at home as opposed to hours at a shop with car up on lift fabricating\/cutting into factory fuel lines and splicing\/cutting\/pinning into OEM electrical\u003c\/li\u003e\n\u003cli\u003e4+ hours in time\/cost savings to get going on Flex Fuel as compared to most other kits that require making custom fuel lines, fittings and custom wiring! \u003c\/li\u003e\n\u003cli\u003eFully reversible\/removable and back to stock without a trace in minutes\u003c\/li\u003e\n\u003cli\u003eCustom 3-piece Aluminum-6061 Flex Fuel sensor adapter with built-in sensor bypass to allow for obstruction free fuel flow made to fit in the vehicle factory fuel hat area below the rear seat\u003c\/li\u003e\n\u003cli\u003eAll connecting points sealed with fuel safe Viton o-rings\u003c\/li\u003e\n\u003cli\u003eFlex Fuel Sensor Adapter housing provides additional 1\/8 NPT ports for optional Fuel Pressure sensor addition to vehicles without a factory one for bootmod3 CustomROM v2 support\u003c\/li\u003e\n\u003cli\u003eCANBUS Enabled Ethanol Content Analyzer (ECA) that integrates with bootmod3 CustomROM for complete and seamless conversion of your BMW to FlexFuel for bootmod3 Flex Fuel enabled OTS MultiMaps and custom tunes with your bootmod3 tuner of choice\u003c\/li\u003e\n\u003cli\u003ePower\/CANBus 4-wire plug and play harness\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e100% Fully Plug and Play harness to the BMW Fuel Controller connectors (EKP3) on S55, N55 vehicles\u003c\/li\u003e\n\u003cli\u003e100% Fully Plug and Play harness on the BMW Body Domain Controller (BDC\/FEM) connector on Gen1 F-series B48\/B58\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eContinental Flex Fuel sensor 3-wire harness\u003c\/li\u003e\n\u003cli\u003eCustom Aluminum-6061 CANBus Enclosure for the bootmod3 ECA board\u003c\/li\u003e\n\u003cli\u003eCustom, kink-free teflon braided line allowing plug and play installation with the OEM fuel hat and factory 5\/16” or 3\/8” fuel feed line. No cutting or new lines required.\u003c\/li\u003e\n\u003cli\u003e-6 AN fitting by Racetronix\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/bootmod3.atlassian.net\/wiki\/spaces\/BCS\/pages\/2592112641\/bootmod3+Flex+Fuel+Kit+Installation+Instructions\" target=\"_blank\"\u003eCLICK HERE for bootmod3 Flex Fuel Installation instructions on the bootmod3 WiKi\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOEM FUEL HAT LOCATION KIT IS INTENDED FOR OEM FUEL PUMP AND ASSOCIATED WIRING. ANY VARIATIONS TO FUEL LINES OR FUEL PUMPS MAY NOT BE COMPATIBLE. USE THE ENGINE BAY INSTALLATION KIT WHERE AVAILABLE INSTEAD.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.protuningfreaks.com\/pages\/terms-and-conditions\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ebootmod3 software and hardware Terms and Conditions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"bootmod3","offers":[{"title":"Pre-Assembled w. Included Continental Flex Fuel Sensor \/ OEM Fuel Hat Location Kit","offer_id":39708023226486,"sku":"BM3-FLX-B48B58-FX-OE","price":1024.99,"currency_code":"AUD","in_stock":true},{"title":"Pre-Assembled w. Included Continental Flex Fuel Sensor \/ Engine Bay Location Kit","offer_id":40067540156534,"sku":"BM3-FLX-B48B58-FX-EB","price":1024.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1217\/5090\/files\/mode-auto-concepts-australia-bootmod3-bm3-flex-fuel-kit-for-b48-b58-n20-n26-n55-n63-s55-s58-s63-bmw-1-2-3-4-5-6-7-8-series-m2-m3-m4-m5-m6-m8-x3m-x4m-x5m-x6m-toyota-supra-a90-6_5cb25440-cf41-471c-9cfa-ff90a665e3d4.jpg?v=1749083588"},{"product_id":"bootmod3-bm3-flex-fuel-kit-for-b58-g-series-gen-2-bmw-330i-m340i-g20-430i-m440i-g22-530i-540i-g30-x3-30i-m40i-g01-x4-30i-m40i-g02-canbus-enabled-ethanol-content-analyzer-eca","title":"bootmod3 Flex Fuel Kit for B58 G-Series Gen 2 BMW M240i G42 M340i G20 M440i G22 540i G30 X3 M40i G01 X4 M40i G02 - CANBUS Ethanol Content Analyzer (ECA)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv itemprop=\"offers\" itemscope=\"\" itemtype=\"http:\/\/schema.org\/Offer\"\u003e\n\u003cdiv class=\"rte\" itemprop=\"description\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003ch4\u003ebootmod3 bootmod3 Flex Fuel Kit for B58 G-Series Gen 2 BMW M240i G42 M340i G20 M440i G22 540i G30 X3 M40i G01 X4 M40i G02 - CANBUS Enabled Ethanol Content Analyzer (ECA)\u003c\/h4\u003e\n\u003ch1\u003eFLEX FUEL \u0026amp; FLEX MAPS WITH bootmod3\u003c\/h1\u003e\n\u003ch3\u003eKIT CONTENTS: \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x bootmod3 Flex Fuel Kit\u003c\/li\u003e\n\u003cli\u003e1x Continental Ethanol Content Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eWe are proud to bring out this truly awesome product that makes getting the required Flex Fuel hardware on your BMW and A9X Supra with incredible ease and minimal effort, in your own driveway.\u003c\/p\u003e\n\u003cp\u003eOur kit is entirely plug and play with the factory vehicle harness. No cutting, splicing of OEM wiring\/connectors. It installs in minutes and can be removed without a trace on the car!\u003c\/p\u003e\n\u003cp\u003eOur team used SolidWorks to design a Flow Optimized Flex Fuel Sensor Adapter (FFSA) to ensure fuel flow is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eunobstructed \u003c\/strong\u003eand with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eno added pressure drop\u003c\/strong\u003e at full fuel pump flow from the fuel tank to your motor when our kit is installed. This is important when pushing the factory fuel system with all the power Ethanol can provide over petrol!\u003c\/p\u003e\n\u003cp\u003eFlex fuel sensor housing is designed to neatly install into the factory BMW fuel hat location.\u003c\/p\u003e\n\u003cp\u003eFlex Fuel Sensor Adapter also contains\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003etwo 1\/8 NPT ports that allow installation of an auxiliary Fuel Pressure sensor\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor vehicles that don’t come with an OEM one from the factory for future use. Depending on fitment, either port can be used.\u003c\/p\u003e\n\u003cp\u003eInstall the bootmod3 Flex Fuel Plug and Play Kit and flash your flex fuel enabled bootmod3 OTS MultiMap or Custom Map in minutes and you’re off to the races never worrying about alcohol\/petrol blend % in your fuel tank. It does not get better or easier than this!\u003c\/p\u003e\n\u003cp\u003ebootmod3 FlexFuel Plug and Play Kit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMinutes to install at home as opposed to hours at a shop with car up on lift fabricating\/cutting into factory fuel lines and splicing\/cutting\/pinning into OEM electrical\u003c\/li\u003e\n\u003cli\u003e4+ hours in time\/cost savings to get going on Flex Fuel as compared to most other kits that require making custom fuel lines, fittings and custom wiring! \u003c\/li\u003e\n\u003cli\u003eFully reversible\/removable and back to stock without a trace in minutes\u003c\/li\u003e\n\u003cli\u003eCustom 3-piece Aluminum-6061 Flex Fuel sensor adapter with built-in sensor bypass to allow for obstruction free fuel flow made to fit in the vehicle factory fuel hat area below the rear seat\u003c\/li\u003e\n\u003cli\u003eAll connecting points sealed with fuel safe Viton o-rings\u003c\/li\u003e\n\u003cli\u003eFlex Fuel Sensor Adapter housing provides additional 1\/8 NPT ports for optional Fuel Pressure sensor addition to vehicles without a factory one for bootmod3 CustomROM v2 support\u003c\/li\u003e\n\u003cli\u003eCANBUS Enabled Ethanol Content Analyzer (ECA) that integrates with bootmod3 CustomROM for complete and seamless conversion of your BMW to FlexFuel for bootmod3 Flex Fuel enabled OTS MultiMaps and custom tunes with your bootmod3 tuner of choice\u003c\/li\u003e\n\u003cli\u003ePower\/CANBus 4-wire plug and play harness\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e100% Fully Plug and Play harness to the BMW Fuel Controller connectors (EKP3) on S55, N55 vehicles\u003c\/li\u003e\n\u003cli\u003e100% Fully Plug and Play harness on the BMW Body Domain Controller (BDC\/FEM) connector on Gen1 F-series B48\/B58\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eContinental Flex Fuel sensor 3-wire harness\u003c\/li\u003e\n\u003cli\u003eCustom Aluminum-6061 CANBus Enclosure for the bootmod3 ECA board\u003c\/li\u003e\n\u003cli\u003eCustom, kink-free teflon braided line allowing plug and play installation with the OEM fuel hat and factory 5\/16” or 3\/8” fuel feed line. No cutting or new lines required.\u003c\/li\u003e\n\u003cli\u003e-6 AN fitting by Racetronix\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/bootmod3.atlassian.net\/wiki\/spaces\/BCS\/pages\/2592112641\/bootmod3+Flex+Fuel+Kit+Installation+Instructions\" target=\"_blank\"\u003eCLICK HERE for bootmod3 Flex Fuel Installation instructions on the bootmod3 WiKi\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOEM FUEL HAT LOCATION KIT IS INTENDED FOR OEM FUEL PUMP AND ASSOCIATED WIRING. ANY VARIATIONS TO FUEL LINES OR FUEL PUMPS MAY NOT BE COMPATIBLE. USE THE ENGINE BAY INSTALLATION KIT WHERE AVAILABLE INSTEAD.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.protuningfreaks.com\/pages\/terms-and-conditions\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ebootmod3 software and hardware Terms and Conditions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"bootmod3","offers":[{"title":"Pre-Assembled w. Included Continental Flex Fuel Sensor \/ OEM Fuel Hat Location Kit","offer_id":40067537109110,"sku":"BM3-FLX-B48B58-GXG2-OE","price":1024.99,"currency_code":"AUD","in_stock":true},{"title":"Pre-Assembled w. Included Continental Flex Fuel Sensor \/ Engine Bay Location Kit","offer_id":40067537600630,"sku":"BM3-FLX-B48B58-GXG2-EB","price":1024.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1217\/5090\/files\/mode-auto-concepts-australia-bootmod3-bm3-flex-fuel-kit-for-b48-b58-n20-n26-n55-n63-s55-s58-s63-bmw-1-2-3-4-5-6-7-8-series-m2-m3-m4-m5-m6-m8-x3m-x4m-x5m-x6m-toyota-supra-a90-5_0f38ac07-73e3-43fd-bb68-b4d558dd922f.jpg?v=1753422143"},{"product_id":"bootmod3-bm3-flex-fuel-kit-for-s58-g-series-bmw-m2-g87-m3-g80-g81-m4-g82-g83-x3m-f97-x4m-f98-canbus-enabled-ethanol-content-analyzer-eca","title":"bootmod3 Flex Fuel Kit for S58 G-Series BMW M2 G87 M3 G80 G81 M4 G82 G83 X3M F97 X4M F98 - CANBUS Ethanol Content Analyzer (ECA)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv itemprop=\"offers\" itemscope=\"\" itemtype=\"http:\/\/schema.org\/Offer\"\u003e\n\u003cdiv class=\"rte\" itemprop=\"description\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003ch4\u003ebootmod3 bootmod3 Flex Fuel Kit for S58 G-Series BMW M2 G87 M3 G80 G81 M4 G82 G83 X3M F97 X4M F98 - CANBUS Enabled Ethanol Content Analyzer (ECA)\u003c\/h4\u003e\n\u003ch1\u003eFLEX FUEL \u0026amp; FLEX MAPS WITH bootmod3\u003c\/h1\u003e\n\u003ch3\u003eKIT CONTENTS: \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x bootmod3 Flex Fuel Kit\u003c\/li\u003e\n\u003cli\u003e1x Continental Ethanol Content Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eWe are proud to bring out this truly awesome product that makes getting the required Flex Fuel hardware on your BMW and A9X Supra with incredible ease and minimal effort, in your own driveway.\u003c\/p\u003e\n\u003cp\u003eOur kit is entirely plug and play with the factory vehicle harness. No cutting, splicing of OEM wiring\/connectors. It installs in minutes and can be removed without a trace on the car!\u003c\/p\u003e\n\u003cp\u003eOur team used SolidWorks to design a Flow Optimized Flex Fuel Sensor Adapter (FFSA) to ensure fuel flow is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eunobstructed \u003c\/strong\u003eand with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eno added pressure drop\u003c\/strong\u003e at full fuel pump flow from the fuel tank to your motor when our kit is installed. This is important when pushing the factory fuel system with all the power Ethanol can provide over petrol!\u003c\/p\u003e\n\u003cp\u003eFlex fuel sensor housing is designed to neatly install into the factory BMW fuel hat location.\u003c\/p\u003e\n\u003cp\u003eFlex Fuel Sensor Adapter also contains\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003etwo 1\/8 NPT ports that allow installation of an auxiliary Fuel Pressure sensor\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor vehicles that don’t come with an OEM one from the factory for future use. Depending on fitment, either port can be used.\u003c\/p\u003e\n\u003cp\u003eInstall the bootmod3 Flex Fuel Plug and Play Kit and flash your flex fuel enabled bootmod3 OTS MultiMap or Custom Map in minutes and you’re off to the races never worrying about alcohol\/petrol blend % in your fuel tank. It does not get better or easier than this!\u003c\/p\u003e\n\u003cp\u003ebootmod3 FlexFuel Plug and Play Kit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMinutes to install at home as opposed to hours at a shop with car up on lift fabricating\/cutting into factory fuel lines and splicing\/cutting\/pinning into OEM electrical\u003c\/li\u003e\n\u003cli\u003e4+ hours in time\/cost savings to get going on Flex Fuel as compared to most other kits that require making custom fuel lines, fittings and custom wiring! \u003c\/li\u003e\n\u003cli\u003eFully reversible\/removable and back to stock without a trace in minutes\u003c\/li\u003e\n\u003cli\u003eCustom 3-piece Aluminum-6061 Flex Fuel sensor adapter with built-in sensor bypass to allow for obstruction free fuel flow made to fit in the vehicle factory fuel hat area below the rear seat\u003c\/li\u003e\n\u003cli\u003eAll connecting points sealed with fuel safe Viton o-rings\u003c\/li\u003e\n\u003cli\u003eFlex Fuel Sensor Adapter housing provides additional 1\/8 NPT ports for optional Fuel Pressure sensor addition to vehicles without a factory one for bootmod3 CustomROM v2 support\u003c\/li\u003e\n\u003cli\u003eCANBUS Enabled Ethanol Content Analyzer (ECA) that integrates with bootmod3 CustomROM for complete and seamless conversion of your BMW to FlexFuel for bootmod3 Flex Fuel enabled OTS MultiMaps and custom tunes with your bootmod3 tuner of choice\u003c\/li\u003e\n\u003cli\u003ePower\/CANBus 4-wire plug and play harness\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e100% Fully Plug and Play harness to the BMW Fuel Controller connectors (EKP3) on S55, N55 vehicles\u003c\/li\u003e\n\u003cli\u003e100% Fully Plug and Play harness on the BMW Body Domain Controller (BDC\/FEM) connector on Gen1 F-series B48\/B58\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eContinental Flex Fuel sensor 3-wire harness\u003c\/li\u003e\n\u003cli\u003eCustom Aluminum-6061 CANBus Enclosure for the bootmod3 ECA board\u003c\/li\u003e\n\u003cli\u003eCustom, kink-free teflon braided line allowing plug and play installation with the OEM fuel hat and factory 5\/16” or 3\/8” fuel feed line. No cutting or new lines required.\u003c\/li\u003e\n\u003cli\u003e-6 AN fitting by Racetronix\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/bootmod3.atlassian.net\/wiki\/spaces\/BCS\/pages\/2592112641\/bootmod3+Flex+Fuel+Kit+Installation+Instructions\" target=\"_blank\"\u003eCLICK HERE for bootmod3 Flex Fuel Installation instructions on the bootmod3 WiKi\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOEM FUEL HAT LOCATION KIT IS INTENDED FOR OEM FUEL PUMP AND ASSOCIATED WIRING. ANY VARIATIONS TO FUEL LINES OR FUEL PUMPS MAY NOT BE COMPATIBLE. USE THE ENGINE BAY INSTALLATION KIT WHERE AVAILABLE INSTEAD.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.protuningfreaks.com\/pages\/terms-and-conditions\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ebootmod3 software and hardware Terms and Conditions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"bootmod3","offers":[{"title":"Pre-Assembled w. Included Continental Flex Fuel Sensor \/ OEM Fuel Hat Location Kit \/ G-Series M2\/M3\/M4 S58 \u0026 LCI Models (2021-present)","offer_id":40067539927158,"sku":"BM3-FLX-S58-G8X-OE","price":1024.99,"currency_code":"AUD","in_stock":true},{"title":"Pre-Assembled w. Included Continental Flex Fuel Sensor \/ OEM Fuel Hat Location Kit \/ F-Series F97 X3M\/X4M S58 Pre-LCI (2019-2021)","offer_id":40427794759798,"sku":"BM3-FLX-S58-F97-OE","price":1024.99,"currency_code":"AUD","in_stock":true},{"title":"Pre-Assembled w. Included Continental Flex Fuel Sensor \/ Engine Bay Location Kit \/ G-Series M2\/M3\/M4 S58 \u0026 LCI Models (2021-present)","offer_id":40067539959926,"sku":"BM3-FLX-S58-G8X-EB","price":1024.99,"currency_code":"AUD","in_stock":true},{"title":"Pre-Assembled w. Included Continental Flex Fuel Sensor \/ Engine Bay Location Kit \/ F-Series F97 X3M\/X4M S58 Pre-LCI (2019-2021)","offer_id":40427794792566,"sku":"BM3-FLX-S58-F97-EB","price":1024.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1217\/5090\/files\/mode-auto-concepts-australia-bootmod3-bm3-flex-fuel-kit-for-b48-b58-n20-n26-n55-n63-s55-s58-s63-bmw-1-2-3-4-5-6-7-8-series-m2-m3-m4-m5-m6-m8-x3m-x4m-x5m-x6m-toyota-supra-a90-6_5cb25440-cf41-471c-9cfa-ff90a665e3d4.jpg?v=1749083588"},{"product_id":"bootmod3-bm3-flex-fuel-kit-for-b58-g-series-gen-1-bmw-m240i-g42-m340i-g20-m440i-g22-540i-g30-x3-m40i-g01-x4-m40i-g02-canbus-enabled-ethanol-content-analyzer-eca","title":"bootmod3 Flex Fuel Kit for B58 G-Series Gen 1 BMW M240i G42 M340i G20 M440i G22 540i G30 X3 M40i G01 X4 M40i G02 - CANBUS Ethanol Content Analyzer (ECA)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv itemprop=\"offers\" itemscope=\"\" itemtype=\"http:\/\/schema.org\/Offer\"\u003e\n\u003cdiv class=\"rte\" itemprop=\"description\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003ch4\u003ebootmod3 bootmod3 Flex Fuel Kit for B58 G-Series Gen 1 BMW M240i G42 M340i G20 M440i G22 540i G30 X3 M40i G01 X4 M40i G02 - CANBUS Enabled Ethanol Content Analyzer (ECA)\u003c\/h4\u003e\n\u003ch1\u003eFLEX FUEL \u0026amp; FLEX MAPS WITH bootmod3\u003c\/h1\u003e\n\u003ch3\u003eKIT CONTENTS: \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x bootmod3 Flex Fuel Kit\u003c\/li\u003e\n\u003cli\u003e1x Continental Ethanol Content Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eWe are proud to bring out this truly awesome product that makes getting the required Flex Fuel hardware on your BMW and A9X Supra with incredible ease and minimal effort, in your own driveway.\u003c\/p\u003e\n\u003cp\u003eOur kit is entirely plug and play with the factory vehicle harness. No cutting, splicing of OEM wiring\/connectors. It installs in minutes and can be removed without a trace on the car!\u003c\/p\u003e\n\u003cp\u003eOur team used SolidWorks to design a Flow Optimized Flex Fuel Sensor Adapter (FFSA) to ensure fuel flow is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eunobstructed \u003c\/strong\u003eand with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eno added pressure drop\u003c\/strong\u003e at full fuel pump flow from the fuel tank to your motor when our kit is installed. This is important when pushing the factory fuel system with all the power Ethanol can provide over petrol!\u003c\/p\u003e\n\u003cp\u003eFlex fuel sensor housing is designed to neatly install into the factory BMW fuel hat location.\u003c\/p\u003e\n\u003cp\u003eFlex Fuel Sensor Adapter also contains\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003etwo 1\/8 NPT ports that allow installation of an auxiliary Fuel Pressure sensor\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor vehicles that don’t come with an OEM one from the factory for future use. Depending on fitment, either port can be used.\u003c\/p\u003e\n\u003cp\u003eInstall the bootmod3 Flex Fuel Plug and Play Kit and flash your flex fuel enabled bootmod3 OTS MultiMap or Custom Map in minutes and you’re off to the races never worrying about alcohol\/petrol blend % in your fuel tank. It does not get better or easier than this!\u003c\/p\u003e\n\u003cp\u003ebootmod3 FlexFuel Plug and Play Kit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMinutes to install at home as opposed to hours at a shop with car up on lift fabricating\/cutting into factory fuel lines and splicing\/cutting\/pinning into OEM electrical\u003c\/li\u003e\n\u003cli\u003e4+ hours in time\/cost savings to get going on Flex Fuel as compared to most other kits that require making custom fuel lines, fittings and custom wiring! \u003c\/li\u003e\n\u003cli\u003eFully reversible\/removable and back to stock without a trace in minutes\u003c\/li\u003e\n\u003cli\u003eCustom 3-piece Aluminum-6061 Flex Fuel sensor adapter with built-in sensor bypass to allow for obstruction free fuel flow made to fit in the vehicle factory fuel hat area below the rear seat\u003c\/li\u003e\n\u003cli\u003eAll connecting points sealed with fuel safe Viton o-rings\u003c\/li\u003e\n\u003cli\u003eFlex Fuel Sensor Adapter housing provides additional 1\/8 NPT ports for optional Fuel Pressure sensor addition to vehicles without a factory one for bootmod3 CustomROM v2 support\u003c\/li\u003e\n\u003cli\u003eCANBUS Enabled Ethanol Content Analyzer (ECA) that integrates with bootmod3 CustomROM for complete and seamless conversion of your BMW to FlexFuel for bootmod3 Flex Fuel enabled OTS MultiMaps and custom tunes with your bootmod3 tuner of choice\u003c\/li\u003e\n\u003cli\u003ePower\/CANBus 4-wire plug and play harness\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e100% Fully Plug and Play harness to the BMW Fuel Controller connectors (EKP3) on S55, N55 vehicles\u003c\/li\u003e\n\u003cli\u003e100% Fully Plug and Play harness on the BMW Body Domain Controller (BDC\/FEM) connector on Gen1 F-series B48\/B58\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eContinental Flex Fuel sensor 3-wire harness\u003c\/li\u003e\n\u003cli\u003eCustom Aluminum-6061 CANBus Enclosure for the bootmod3 ECA board\u003c\/li\u003e\n\u003cli\u003eCustom, kink-free teflon braided line allowing plug and play installation with the OEM fuel hat and factory 5\/16” or 3\/8” fuel feed line. No cutting or new lines required.\u003c\/li\u003e\n\u003cli\u003e-6 AN fitting by Racetronix\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/bootmod3.atlassian.net\/wiki\/spaces\/BCS\/pages\/2592112641\/bootmod3+Flex+Fuel+Kit+Installation+Instructions\" target=\"_blank\"\u003eCLICK HERE for bootmod3 Flex Fuel Installation instructions on the bootmod3 WiKi\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOEM FUEL HAT LOCATION KIT IS INTENDED FOR OEM FUEL PUMP AND ASSOCIATED WIRING. ANY VARIATIONS TO FUEL LINES OR FUEL PUMPS MAY NOT BE COMPATIBLE. USE THE ENGINE BAY INSTALLATION KIT WHERE AVAILABLE INSTEAD.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.protuningfreaks.com\/pages\/terms-and-conditions\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ebootmod3 software and hardware Terms and Conditions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"bootmod3","offers":[{"title":"Pre-Assembled w. Included Continental Flex Fuel Sensor \/ OEM Fuel Hat Location Kit","offer_id":40067540844662,"sku":"BM3-FLX-B48B58-GXG1-OE","price":1024.99,"currency_code":"AUD","in_stock":true},{"title":"Pre-Assembled w. Included Continental Flex Fuel Sensor \/ Engine Bay Location Kit","offer_id":40067540877430,"sku":"BM3-FLX-B48B58-GXG1-EB","price":1024.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1217\/5090\/files\/mode-auto-concepts-australia-bootmod3-bm3-flex-fuel-kit-for-b48-b58-n20-n26-n55-n63-s55-s58-s63-bmw-1-2-3-4-5-6-7-8-series-m2-m3-m4-m5-m6-m8-x3m-x4m-x5m-x6m-toyota-supra-a90-5_0f38ac07-73e3-43fd-bb68-b4d558dd922f.jpg?v=1753422143"},{"product_id":"bootmod3-bm3-rev2-controller-for-s58-g-series-bmw-m2-g87-m3-g80-g81-m4-g82-g83-x3m-f97-x4m-f98-powered-by-bootmod3-directpwm-and-flexray","title":"bootmod3 REV2 Controller for S58 \u0026 B58 BMW G-Series - Powered by bootmod3 DirectPWM \u0026 Flexray™","description":"\u003cdiv\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eREV2 Controller\u003c\/strong\u003e - The most advanced and industry first\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFlexRay™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eDirectPWM\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emotorsport ECU featuring an IP66 waterproof enclosure and a Mil-Spec motorsport-grade wiring harness.\n\u003cp\u003eWith the idea and work originating as far back as 2019, even discussing it in the bootmod3 enthusiasts group \u003ca href=\"https:\/\/www.facebook.com\/groups\/bootmod3\/posts\/2370345489851894\" target=\"_blank\"\u003eon Facebook in May 2019,\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eall the while juggling countless other development efforts on new features released since then such as CustomROM, new Map Editor, Flex Fuel Kits, WiFi Adapter, support for other engine types and vehicles, this incredible hardware\/software interfacing project is finally here, and we can't be more excited have you use it!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eOnce installed in a vehicle, REV2 Controller integrates with the DME using the incredibly fast and robust\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFlexRay\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e™\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eprotocol. In addition, bootmod3 CustomROM V2 goes a step further and implements a highly innovative PWM control strategy,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eDirectPWM\u003c\/strong\u003e.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is FlexRay™?\u003c\/strong\u003e\u003cbr\u003e\u003cspan class=\"oXzekf\" data-huuid=\"8353027819596365745\"\u003e\u003cspan\u003eFlexRay™ is a high-speed communication protocol used in vehicles and aircraft.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"oXzekf\" data-huuid=\"8353027819596364240\"\u003e\u003cspan\u003eIt's designed to be reliable, fault-tolerant, and efficient. Its used in safety-critical applications, advanced driver assistance systems, power train, body control modules, battery management systems, and more. Over the past decade, vehicle manufacturers have transitioned away from CANBUS on modern vehicles for many in-vehicle control systems and REV2 Controller has followed that trend.\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is DirectPWM?\u003c\/strong\u003e\u003cbr\u003ebootmod3 CustomROM V2 software update implements DirectPWM to re-purpose an existing DME pin output and uses it to send a PWM signal directly through the OEM factory vehicle harness to a REV2 input. REV2 in turn replicates that PWM signal to one of its outputs. With no communication protocol overhead involved, DirectPWM provides for the absolute fastest, most direct control of a REV2 connected output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich outputs can use DirectPWM, and how is this configured?\u003c\/strong\u003e\u003cbr\u003eSequential Port Injection and Boost Control Solenoid (MAC valve) are configurable with DirectPWM trigger control. Tuners and end users simply toggle it on the bootmod3 Map Configuration screen and store it on the DME. Integration is seamless and no configuration\/updates are required to the REV2 Controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOnce my REV2 is installed in the vehicle, do I need to connect it for any tuning like with some standalone ECUs?\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003eNo. You simply install the REV2 and forget about it :) All your tuning is still done on the DME using the bootmod3 Map Editor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eHow do I update firmware on the REV2?\u003c\/strong\u003e\u003cbr\u003eAlthough firmware updates are a very rare occurrence since REV2 contains no state or tuning data, for the odd occasion we may have a firmware bug, REV2 Controller integrates \u003cstrong\u003eWiFi. \u003c\/strong\u003eAny firmware updates would be done simply through the bootmod3 app like with our \u003ca href=\"https:\/\/www.protuningfreaks.com\/products\/bootmod3-bootmod3-wireless-obdii-wifi-flash-adapter?srsltid=AfmBOooBU4aTJhf9xZRJE4CG6eGuBlF4VZQNuIRXJp-14k1ZL5BgENUi\"\u003ebootmod3 WiFi Adapter.\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLong question, geeks only! :) FlexRay™ has options for communicating using a dynamic and a static segment. Static segment is much harder to implement and its the one that ensures message delivery making it highly desirable over a lossy\/broadcast type protocol such as CANBUS that which ensure message delivery. Tell me you implemented support FlexRay's static segment?\u003c\/strong\u003e\u003cbr\u003eYou bet we did! DME CustomROM V2 and REV2 utilize the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003estatic segment on FlexRay to guarantee message delivery\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor output control communications.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDoes REV2 Controller implement an Ethanol Content Analyzer and send ethanol content and fuel temperature to the DME?\u003c\/strong\u003e\u003cbr\u003eREV2 provides a digital input on its harness for an Ethanol Sensor. However, unlike with our \u003ca href=\"https:\/\/www.protuningfreaks.com\/products\/bootmod3-flexfuel-kit-canbus-enabled-and-100-plug-n-play?srsltid=AfmBOor3E8CZAWQoNw2jRoLvnPs5kDrL0Vnd5H7XsQu5oKaL3rZg0xsI\"\u003ebootmod3 Flex Fuel Kit Controller\u003c\/a\u003e, REV2 does not do any ethanol content analysis in its firmware. As with all sensors connected to REV2 inputs, REV2 also sends raw frequency\/PWM data from the ethanol sensor to the DME without any processing of it in the firmware. DME then analyzes that raw sensor data and converts it into ethanol content and fuel temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes REV2 a built in MAP sensor, or have an input for a MAP sensor?\u003cbr\u003e\u003c\/strong\u003eREV2 doesn't have a built-in MAP sensor or an input for an aftermarket MAP sensor. Instead, we provide a separate plug'n'play harness which connects an aftermarket MAP sensor directly to the OEM vehicle harness. Aftermarket MAP sensor is then calibrated in custom tables stored on the DME.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes REV2 and bootmod3 CustomROM V2 provide any safeties for connected inputs and outputs?\u003c\/strong\u003e\u003cbr\u003eREV2 simply relays connected sensor data to the DME. bootmod3 CustomROM V2 functionality on the DME takes in that data to provide a tuner to configure over 40 custom trouble codes for various integrated safeties such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIgnition Coil Cut Safety, per cylinder\u003c\/li\u003e\n\u003cli\u003eDirect Injector Cut Safety, per cylinder\u003c\/li\u003e\n\u003cli\u003ePort Fuel Injector Cut Safety, per cylinder\u003c\/li\u003e\n\u003cli\u003eCoolant Over-Pressure Safety (e.g. due to a leaking head gasket)\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Safety\u003c\/li\u003e\n\u003cli\u003eVarious engine status safeties for: Cam Sync, Board Status, FlexRay connectivity\u003c\/li\u003e\n\u003cli\u003eOver-boost Safety for Boost Control PID\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eKnock Safety based on Ignition Timing Corrections, per cylinder\u003c\/li\u003e\n\u003cli\u003eCustom Load and Torque Limiter Safeties\u003c\/li\u003e\n\u003cli\u003eVarious Nitrous Safeties such as\n\u003cul\u003e\n\u003cli\u003eBottle under\/over pressure\u003c\/li\u003e\n\u003cli\u003eLean run timer\u003c\/li\u003e\n\u003cli\u003ePre\/Post spray timer with Ignition Timing and Lambda Target compensations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMethanol \/ Water Tank Level Safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need bootmod3 or CustomROM to use the REV2 Controller on my car?\u003cbr\u003e\u003c\/strong\u003eREV2 Controller is not a standalone ECU and as such does not have any calibration table data. All tuning and features are done on the DME. DME must be running the bootmod3 CustomROM V2 software update to use the REV2 Controller on your vehicle.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to re-send my DME to Femto for unlock again if I already unlocked it before?\u003cbr\u003e\u003c\/strong\u003eIf your vehicle's DME required a Femto unlock and you've already done it, unfortunately due to how Femto's unlock works, you'll have to re-send it for Femto to load the bootmod3 CustomROM V2 update on your DME. Those re-sending DMEs for updates get adjusted lower pricing, but for all DME unlock details get in touch with Femto.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy vehicle's DME doesn't require a Femto unlock. I can directly and fully flash it over OBD or after a bench unlock. Can I just flash the required bootmod3 CustomROM V2 map from my tuner on the DME?\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003eYes, flash away!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eREV2 Controller\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehas the following sensor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003einputs\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(sensors not included):\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eFuel Pressure Sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCoolant Pressure\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEthanol Content Sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNitrous Bottle Pressure Sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 Exhaust Gas Temperature Sensors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTurbine Speed Sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLaser Ride Height Sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMethanol Flow Sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eMethanol Tank Level Sensor\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eREV2 Controller\u003c\/strong\u003e has the following \u003cstrong\u003eoutputs\u003c\/strong\u003e (hardware such as injectors, solenoids and pumps not included):\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSequential Port Fuel Injection (PI) for up to 8 high impedance injectors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBoost Control support for a pneumatic boost solenoid (MAC valve)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eNitrous Solenoid\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eMethanol \/ Water Injection using \u003c\/span\u003e\u003cspan\u003e2 independent outputs for meth\/water pump and solenoid\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFuel Pump \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLine Lock, full integration with the brake pedal and OEM steering wheel controls requiring no additional aftermarket switches in the car\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e\n\u003cstrong\u003eREV2 Controller\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003ebase package\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eincludes everything needed to get started:\u003cbr\u003e\n\u003c\/div\u003e\n\u003cul data-border=\"0\" data-indent=\"0\" class=\"p-rich_text_list p-rich_text_list__bullet p-rich_text_list--nested\" data-list-tree=\"true\" data-stringify-type=\"unordered-list\"\u003e\n\u003cli data-stringify-border=\"0\" data-stringify-indent=\"0\"\u003eREV2 Board\u003c\/li\u003e\n\u003cli data-stringify-border=\"0\" data-stringify-indent=\"0\"\u003eREV2 IP66 Polycarbonate Enclosure and Mounting Bracket\u003c\/li\u003e\n\u003cli data-stringify-border=\"0\" data-stringify-indent=\"0\"\u003eREV2 Main Mil-Spec Race Harness\u003c\/li\u003e\n\u003cli data-stringify-border=\"0\" data-stringify-indent=\"0\"\u003eREV2 Flex Fuel Sensor Sub-harness (no sensor provided)\u003c\/li\u003e\n\u003cli data-stringify-border=\"0\" data-stringify-indent=\"0\"\u003eREV2 Pressure Sub-harness (optionally provided fuel pressure sensor at extra cost)\u003c\/li\u003e\n\u003cli data-stringify-border=\"0\" data-stringify-indent=\"0\"\u003ebootmod3 Plug'n'Play MAP sensor harness for OEM TMAP (intake manifold) sensor for use with the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eincluded 100psi (7 BAR) MAP sensor \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e\n\u003cspan data-stringify-type=\"paragraph-break\" class=\"c-mrkdwn__br\" aria-label=\"\"\u003e\u003c\/span\u003eWe suggest adding the following sensor from the options:\u003cbr\u003e\n\u003c\/div\u003e\n\u003cul data-border=\"0\" data-indent=\"0\" class=\"p-rich_text_list p-rich_text_list__bullet p-rich_text_list--nested\" data-list-tree=\"true\" data-stringify-type=\"unordered-list\"\u003e\n\u003cli data-stringify-border=\"0\" data-stringify-indent=\"0\"\u003e\n\u003cstrong\u003e150 PSI (10 BAR)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003epressure sensor (absolute pressure) for\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003efuel pressure on your Port Injection feed line.\u003c\/li\u003e\n\u003cli data-stringify-border=\"0\" data-stringify-indent=\"0\"\u003e\u003cstrong\u003eHIGHLY RECOMMENDED: Port injection fuel injectors from reputable brands such as\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/injectordynamics.com\/\" target=\"_blank\"\u003eInjector Dynamics\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor similar that publish injector flow and latency specifications.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e\n\u003cspan data-stringify-type=\"paragraph-break\" class=\"c-mrkdwn__br\" aria-label=\"\"\u003e\u003c\/span\u003eFor flex fuel support, if you're not already running a flex fuel kit on your vehicle and plan on running with ethanol (E85), we recommend our standard High Flow bootmod3 flex fuel kit. For those that don't mind losing some flow capacity in their DI fuel system we also have the option of going with the more economical kit that uses PR 360 fittings. This contains everything from our bootmod3 Flex Fuel Kit that is required for use with the REV2 as well as the ethanol sensor (exception being the wiring and the flex fuel kit's controller):\u003cbr\u003e\n\u003c\/div\u003e\n\u003cul data-border=\"0\" data-indent=\"0\" class=\"p-rich_text_list p-rich_text_list__bullet p-rich_text_list--nested\" data-list-tree=\"true\" data-stringify-type=\"unordered-list\"\u003e\n\u003cli data-stringify-border=\"0\" data-stringify-indent=\"0\"\u003e\n\u003cstrong\u003eHigh-Flow\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(includes flex sensor bypass) bootmod3 Engine-Bay Flex Fuel Kit, or,\u003c\/li\u003e\n\u003cli data-stringify-border=\"0\" data-stringify-indent=\"0\"\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(no flex sensor bypass) Kit with PR machined 360 Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e\n\u003cspan data-stringify-type=\"paragraph-break\" class=\"c-mrkdwn__br\" aria-label=\"\"\u003e\u003c\/span\u003e\u003cstrong\u003eSuggestion\u003c\/strong\u003e: Replace the OEM charge pipe MAP sensor with a 5 BAR OEM Bosch\/BMW MAP sensor.\u003c\/div\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e\n\u003cspan\u003e \u003cstrong\u003eREV2 Controller Requirements:\u003cbr\u003e\u003c\/strong\u003e- bootmod3 CustomROM V2 is a MUST! Contact support@protuningfreaks.com if you're unsure what software your vehicle's DME is running\u003cbr\u003e- Cloned (fully programmable) DME, or, FEMTO unlocked specifically for bootmod3 CustomROM V2\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eCURRENT VEHICLE SUPPORT:\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e- All S58 engine vehicles\u003cbr\u003e- 2021+ BMW G80 M3 \/ M3 CS\u003cbr\u003e- 2021+ BMW G82 \/ G83 M4 \/ M4 CS\u003cbr\u003e- 2022+ BMW G87 M2\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e- 2019+ BMW F97 X3M \/ F98 X4M\u003c\/div\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e\n\u003cstrong\u003eREV2 Controller Marketing Website:\u003cbr\u003e\u003c\/strong\u003e\u003ca href=\"https:\/\/rev2.protuningfreaks.com\/\" target=\"_blank\"\u003ehttps:\/\/rev2.protuningfreaks.com\/\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e\n\u003cstrong\u003eSupport for REV2 Controller on other vehicles and engine types will be rolling out following S58 release.\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\n\u003cdiv class=\"rte__video-wrapper\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/6n4sgRDiuQo?si=WA9zNZ5TF7V49Ju3\" height=\"315\" width=\"560\" class=\"wrapped\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e\n\u003cdiv class=\"rte__video-wrapper\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/GbkeWOXY_e8?si=G02JttHSTIW5S-_3\" title=\"YouTube video player\" class=\"wrapped\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"bootmod3","offers":[{"title":"S58 \/ Gen 2 B58 \/ Include 10BAR Fuel Pressure Sensor (150PSI)","offer_id":42101592424566,"sku":"BM3-REV2-S58","price":3299.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1217\/5090\/files\/mode-auto-concepts-australia-bootmod3-bm3-rev2-controller-for-s58-g-series-bmw-m2-g87-m3-g80-g81-m4-g82-g83-x3m-f97-x4m-f98-powered-by-bootmod3-directpwm-and-flexray-1.webp?v=1742801288"},{"product_id":"bootmod3-bm3-rev2-coolant-pressure-sensor-kit-for-s58-g-series-bmw-m2-g87-m3-g80-g81-m4-g82-g83-x3m-f97-x4m-f98","title":"bootmod3 REV2 Coolant Pressure Sensor Kit for S58 \u0026 B58 BMW G-Series","description":"\u003cp class=\"p1\"\u003e\u003cb\u003eprotuningfreaks Coolant Pressure Sensor Kit – Essential Fail-Safe for High Power BMW B58 \u0026amp; S58 Engines running REV2 Controller and bootmod3 CustomROM V2\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eProtect your high-performance\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eB58 and S58 engine\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ewith the\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eprotuningfreaks Coolant Pressure Sensor Kit\u003c\/b\u003e\u003c\/span\u003e—the ultimate plug-and-play solution for monitoring coolant pressure and preventing catastrophic failures caused by\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003ehead lifting or head gasket issues\u003c\/b\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e⚠️\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eImportant:\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eThis kit\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003erequires\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003ethe REV2 Controller\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eand\u003c\/strong\u003e \u003cspan class=\"s1\"\u003e\u003cb\u003ethe CustomROM V2\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003efor full functionality.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eKey Features:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e✅\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eFail-Safe Protection:\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eWhen connected to the\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eREV2 Controller\u003c\/b\u003e\u003c\/span\u003e, the sensor transmits real-time\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"s1\"\u003ecoolant pressure sensor voltage data\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eover\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eFlexRay\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eto the\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eDME\u003c\/b\u003e\u003c\/span\u003e. Tuners can set a maximum pressure threshold in the DME map to trigger failsafes such as cutting any\/all power adders (boost, nitrous), port injection, di injection—helping prevent severe engine damage.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e✅\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eSeamless Integration:\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eAvailable in two versions to ensure compatibility with your setup.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e✅\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eEasy Installation:\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eNo cutting or modifications required—our kit connects directly to the\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003efactory coolant lines\u003c\/b\u003e\u003c\/span\u003e making installation quick and hassle-free.\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e- 6061 Aluminum CNC Coolant Pressure Sensor fitting\u003cbr\u003e- Viton o-ring\u003cbr\u003e- Metal c-clip for factory mounting\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cstrong\u003eOptional:\u003c\/strong\u003e\u003cbr\u003e- 10 bar (150 psi) pressure sensor\u003cbr\u003e- PNP sub-harness for the REV2 \"CP\" input connector\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eUpgrade your build with the\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eprotuningfreaks Coolant Pressure Sensor Kit\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eand drive with confidence knowing your engine has the protections REV2 Controller and CustomROM V2 provide.\u003c\/p\u003e","brand":"bootmod3","offers":[{"title":"Include Sensor \u0026 Harness","offer_id":42101597110390,"sku":"BM3-REV2-CPS-S58","price":459.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1217\/5090\/files\/mode-auto-concepts-australia-bootmod3-bm3-rev2-coolant-pressure-sensor-kit-for-s58-g-series-bmw-m2-g87-m3-g80-g81-m4-g82-g83-x3m-f97-x4m-f98-1.webp?v=1742801618"},{"product_id":"bootmod3-bm3-flex-fuel-kit-basic","title":"bootmod3 Flex Fuel Kit - Basic for BMW B48 B58 S58 - CANBUS Ethanol Content Analyzer (ECA)","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003ch4\u003ebootmod3 bootmod3 Flex Fuel Kit - Basic\u003c\/h4\u003e\n\u003ch1\u003eFLEX FUEL \u0026amp; FLEX MAPS WITH bootmod3\u003c\/h1\u003e\n\u003ch3\u003eKIT CONTENTS: \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x bootmod3 Flex Fuel Kit - Basic\u003c\/li\u003e\n\u003cli\u003e1x Continental Ethanol Content Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eOften requested alternative to our High Flow Kit, the Basic Flex Fuel Kit, is finally here for your BMW GEN1 and GEN2 B48 \/ B58, A9x Supra and S58 engine vehicles.\u003c\/p\u003e\n\u003cp\u003eThis kit is engine bay mounted. It provides for a more economical option to our high flow kit in adding flex fuel to your vehicle.\u003c\/p\u003e\n\u003cp\u003eCompared to our High Flow Flex Fuel Kit, this kit uses specialty fittings to plug and play with the OEM fuel lines.\u003c\/p\u003e\n\u003cp\u003eInstall this flex fuel kit and flash your flex fuel enabled bootmod3 OTS MultiMap or Custom Map in minutes and you’re off to the races never worrying about alcohol\/petrol blend % in your fuel tank. It does not get easier than this!\u003c\/p\u003e\n\u003cp\u003ebootmod3 FlexFuel Basic Kit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eMinutes to install at home as opposed to hours at a shop with car up on lift fabricating\/cutting into factory fuel lines and splicing\/cutting\/pinning into OEM electrical\u003c\/li\u003e\n\u003cli\u003eTwo specialty 5\/16\" plug and play Flex Fuel Sensor fittings\u003c\/li\u003e\n\u003cli\u003e4+ hours in time\/cost savings to get going on Flex Fuel as compared to most other kits that require making custom fuel lines, fittings and custom wiring! \u003c\/li\u003e\n\u003cli\u003eFully reversible\/removable and back to stock without a trace in minutes\u003c\/li\u003e\n\u003cli\u003eCANBUS Enabled Ethanol Content Analyzer (ECA) that integrates with bootmod3 CustomROM for complete and seamless conversion of your BMW\/Supra to FlexFuel for \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003ebootmod3 Flex Fuel enabled OTS MultiMaps and custom tunes with your\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003ebootmod3 tuner of choice\u003c\/li\u003e\n\u003cli\u003eContinental Flex Fuel sensor\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eFlex Fuel Sensor harness\u003c\/li\u003e\n\u003cli\u003ePower\/CANBus plug and play harness, 100% Fully Plug and Play with the BMW \/ Toyota Supra MKV Body Domain Controller (BDC) connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTHIS KIT IS FOR ENGINE BAY INSTALLATION.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.protuningfreaks.com\/pages\/terms-and-conditions\" target=\"_blank\"\u003e\u003cstrong\u003ebootmod3 software and hardware Terms and Conditions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eOEM FUEL HAT LOCATION KIT IS INTENDED FOR OEM FUEL PUMP AND ASSOCIATED WIRING. ANY VARIATIONS TO FUEL LINES OR FUEL PUMPS MAY NOT BE COMPATIBLE. USE THE ENGINE BAY INSTALLATION KIT WHERE AVAILABLE INSTEAD.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.protuningfreaks.com\/pages\/terms-and-conditions\"\u003e\u003cstrong\u003ebootmod3 software and hardware Terms and Conditions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"bootmod3","offers":[{"title":"BMW F-Series B58 \/ B48 \/ Pre-Assembled w. Included Continental Flex Fuel Sensor \/ Engine Bay Location Kit (PR360)","offer_id":42196504838262,"sku":"BM3-FLX-B48B58-FX-EB-BAS","price":858.99,"currency_code":"AUD","in_stock":true},{"title":"BMW F-series F97 X3M\/X4M S58 PRE-LCI (2019-2021) \/ Pre-Assembled w. Included Continental Flex Fuel Sensor \/ Engine Bay Location Kit (PR360)","offer_id":42196520894582,"sku":"BM3-FLX-S58-F97-EB-BAS","price":858.99,"currency_code":"AUD","in_stock":true},{"title":"BMW G-Series GEN1 B58 \/ B48 \/ Pre-Assembled w. Included Continental Flex Fuel Sensor \/ Engine Bay Location Kit (PR360)","offer_id":42196520927350,"sku":"BM3-FLX-B48B58-GXG1-EB-BAS","price":858.99,"currency_code":"AUD","in_stock":true},{"title":"BMW G-Series GEN2 B58 \/ B48 \u0026 Toyota Supra A90 \/ Pre-Assembled w. Included Continental Flex Fuel Sensor \/ Engine Bay Location Kit (PR360)","offer_id":42196520960118,"sku":"BM3-FLX-B48B58-GXG2-EB-BAS","price":858.99,"currency_code":"AUD","in_stock":true},{"title":"BMW G-Series S58 \/ Pre-Assembled w. Included Continental Flex Fuel Sensor \/ Engine Bay Location Kit (PR360)","offer_id":42196520992886,"sku":"BM3-FLX-S58-G8X-EB-BAS","price":858.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1217\/5090\/files\/mode-auto-concepts-australia-bootmod3-bm3-flex-fuel-kit-basic-b48-330i-b58-140i-240i-340i-m240i-m340-toyota-supra-s58-bmw-m2-g87-m3-g80-g81-m4-g82-g83.webp?v=1746060357"},{"product_id":"bootmod3-bm3-rev2-boost-take-off-fitting-for-s58-g-series-bmw-m2-g87-m3-g80-g81-m4-g82-g83-x3m-f97-x4m-f98-oem-manifold","title":"bootmod3 REV2 Boost Take-off Fitting for S58 \u0026 B58 BMW G-Series - (OEM Intake Manifold)","description":"\u003cp class=\"p1\"\u003eFor those with an OEM intake manifold, you can now easily add an aftermarket MAP sensor to your B58 or S58-powered vehicle without modifying the OEM intake manifold in any way. This Boost Takeoff Fitting is a direct-fit solution designed specifically for the factory plastic intake manifold—no drilling, no tapping, and no risk of damage.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe fitting is a precision-machined 2-piece design, machined from 6061 aluminum hard anodized for corrosion resistance and a clean OEM+ look. It installs in minutes on the EVAP line between the purge valve and the OEM intake manifold, and provides a reliable Manifold Boost Pressure source.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"p3\"\u003e\n\u003cb\u003e\u003c\/b\u003eDesigned for OEM intake manifolds and EVAP line OEM connectors\u003c\/li\u003e\n\u003cli class=\"p3\"\u003e2-piece machined 6061 aluminum construction\u003c\/li\u003e\n\u003cli class=\"p3\"\u003eHard anodized black finish for durability and stealthy appearance\u003c\/li\u003e\n\u003cli class=\"p3\"\u003eAdds a boost reference point for aftermarket MAP sensors for the intake manifold\u003c\/li\u003e\n\u003cli class=\"p3\"\u003eNo permanent modifications of the OEM intake manifold—no drilling or tapping required\u003c\/li\u003e\n\u003cli class=\"p3\"\u003eInstalls in minutes using factory mounting provisions\u003c\/li\u003e\n\u003cli class=\"p3\"\u003eLeak-free seal and OEM+ fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p4\"\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"p4\"\u003eMachined 6061 housing for MAP sensor with 1\/8 NPT port\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"p4\"\u003eMachined cover piece that secures the OEM hose from the EVAP valve\u003c\/li\u003e\n\u003cli class=\"p4\"\u003e2 screws to secure the cover piece\u003c\/li\u003e\n\u003cli class=\"p4\"\u003eViton o-ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003eA clean, convenient, and risk-free way to tap boost on modern BMW engines.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eFitment:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"p1\"\u003eFits all B58 and S58 engine vehicles, as well as any other using the same OEM style plastic fitting with the plastic circular release on it\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"bootmod3","offers":[{"title":"Default Title","offer_id":42264885395574,"sku":"BM3-REV2-BTO-S58","price":169.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1217\/5090\/files\/mode-auto-concepts-australia-bootmod3-bm3-rev2-boost-take-off-fitting-for-s58-g-series-bmw-m2-g87-m3-g80-g81-m4-g82-g83-x3m-f97-x4m-f98-oem-manifold-6.webp?v=1748574118"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1217\/5090\/collections\/mode-auto-concepts-australia-bootmod3-bm3-flex-fuel-kit-for-b48-b58-n20-n26-n55-n63-s55-s58-s63-bmw-1-2-3-4-5-6-7-8-series-m2-m3-m4-m5-m6-m8-x3m-x4m-x5m-x6m-toyota-supra-a90-5_0f38ac0.jpg?v=1732340931","url":"https:\/\/modeautoconcepts.com\/ar-nz\/collections\/bootmod3-1.oembed","provider":"MODE Auto Concepts","version":"1.0","type":"link"}