MODE x EEP
We've teamed up with EEP to create the ultimate hardware range, engineered, designed, developed and tested to the most strenuous levels right here in Australia. The MODE x EEP range is a hardcore collaboration for big HP builds to handle the most strenuous levels, with proven results from our record holding 8 second G80 M3 and 1,000+ HP S55's the MODE x EEP range sets the standard for serious parts Down under.
WHAT IS A REAR CAMBER SHIM KIT?
The S55 & S58 powered M3 F8X & G8X have been know to increase camber as the vehicle is lowered.
The rigidly mounted rear subframe and relatively low count of rubber bushings in the back of the F8X means that alignment changes translate very directly into the car’s behavior, and can be felt immediately when a change is made.
A rear camber shim kit is able to lock the rear camber at a set angle to prevent unwanted camber due to lowering or movement of the eccentric bolts.
WHY DO I NEED IT?
When setting up your M car for high performance driving, properly setting the rear camber and toe will yield significant results. The factory eccentric camber bolt has a reasonable amount of adjustment however not a perfect solution when precision and reliability is key. Due to the multi-link design of the rear subframe camber is relative to vehicle height therefore the lower the vehicle the more camber is applied. Often this is overlooked and can significantly affect vehicle performance and grip, no point having all that power if you can get it to the ground.
In some cases, stock vehicles vary from 1.5/2.0 degrease camber on the rear witch is excessive for street application when ideal specs are 0.5/1.0 degrees. Often this goes without notice till it’s time for new tyres or a vehicle service/inspection meaning premature tyre ware, poor performance/traction and not getting the expected kms from expensive tyres.
Another issue is the factory eccentric bolt under hard driving can shift under load causing rear camber alignment to change without you knowing. This can be a frustrating situation if not identified early when one wheels alignment is completely different to the other affecting the driving experience.
KEY FEATURES:
- Rigid Camber shims provide precise camber adjustment
- 5 Shim offsets for precise adjustment
- Can be used in different orientations for 9 camber positions
- Will NOT move under load or extreme force (Tested in Australia's Fastest G8X)
MODE x EEP REAR CAMBER SHIM KIT INCLUDES:
- MODE x EEP Rigid Rear Camber Shims
- 5x Shim Offsets
- 2x Fasteners Gr. 12.9
INSTALLATION:
Installation of any rear camber solution should be carried out by highly qualified technicians prior to a laser wheel alignment.
Please Click Here to locate a dealer in your area.
APPLICATIONS:
- BMW M3 G80 (2021-present)
- BMW M4 G82 (2021-present)
- BMW M2 G87 (2023-present)
- BMW M3 F80 (2014-2018)
- BMW M4 F82/F83 (2014-2020)
- BMW M2 F87 (2015-2017)
- BMW M2 Competition F87 (2018-2021)
- BMW M3 E90/E92 (2007-2013)
-
BMW 1M E82 (2011-2012)
Also suits BMW 1/2/3/4 F-Series Models
ATTENTION: MODE Auto Concepts & Elite Euro Performance assume no liability on the use or improper installation of this product. Product is for off-road / racing use only.
Produktname
Verkäufer
¥20 JPY | ¥25 JPY
Produktname
Verkäufer
¥20 JPY | ¥25 JPY
Produktname
Verkäufer
¥20 JPY | ¥25 JPY
Produktname
Verkäufer