Zu Inhalt springen
Contact carrier directly for shipping updates 📲 🚚- > Click HERE for March Discounts! 😉
Contact carrier directly for shipping updates 📲 🚚- > Click HERE for March Discounts! 😉
EEP Rear Camber Shim Kit S55 BMW M3 F80 M4 F82 M2 Competition F87 - MODE Auto Concepts

EEP Rear Camber Shim Kit S58 BMW M3 G80 G81 M4 G82 G83 M2 G87

von EEP (Elite Euro Performance)
Sparen Sie 33 %
$149.99
$99.99
SKU EEP-RCSK-FGX
Verfügbarkeit: Translation missing: de.general.icons.icon_check_circle Icon Nur noch 1 übrig!

Benachrichtigen Sie mich, wenn der Artikel wieder verfügbar ist

The S58 powered M3 G80 G81, M4 G82 G83 & M2 G87 have been know to increase camber as the vehicle is lowered.

The rigidly mounted rear subframe and relatively low count of rubber bushings in the back of the G8X means that alignment changes translate very directly into the car’s behavior, and can be felt immediately when a change is made.

A rear camber shim kit is able to lock the rear camber at a set angle to prevent unwanted camber due to lowering or movement of the eccentric bolts.

WHY DO I NEED IT?

When setting up your M car for high performance driving, properly setting the rear camber and toe will yield significant results. The factory eccentric camber bolt has a reasonable amount of adjustment however not a perfect solution when precision and reliability is key. Due to the multi-link design of the rear subframe camber is relative to vehicle height therefore the lower the vehicle the more camber is applied. Often this is overlooked and can significantly affect vehicle performance and grip, no point having all that power if you can get it to the ground.

In some cases, stock vehicles vary from 1.5/2.0 degrease camber on the rear witch is excessive for street application when ideal specs are 0.5/1.0 degrees. Often this goes without notice till it’s time for new tyres or a vehicle service/inspection meaning premature tyre ware, poor performance/traction and not getting the expected kms from expensive tyres. 

Another issue is the factory eccentric bolt under hard driving can shift under load causing rear camber alignment to change without you knowing. This can be a frustrating situation if not identified early when one wheels alignment is completely different to the other affecting the driving experience.

EEP REAR CAMBER SHIM KIT INCLUDES:

  • 4x EEP Rear Camber Shims
  • 2x Fasteners Gr. 12.9

INSTALLATION:

Installation of any rear camber solution should be carried out by highly qualified technicians prior to a laser wheel alignment.

Please Click Here to locate a dealer in your area.

APPLICATIONS:

  • BMW M3 G80/G81 (2021-present)

  • BMW M3 G80/G81 Competition (2021-present)

  • BMW M4 G82/G83 (2021-present)

  • BMW M4 F82/F83 Competition (2021-present)

  • BMW M4 G82 CSL ( 2021-present)

  • BMW M2 G87 (2022-present) 

ATTENTION: MODE Auto Concepts & Elite Euro Performance assume no liability on the use or improper installation of this product. Product is for off-road / racing use only.