MTS Technik Street Suspension - Adjustable Coilovers w. Eibach Springs for BMW 3 Series E30 (45mm Strut)

Coilover Kit BMW 3 Series E30

Coilover Kit MTS Technik for BMW 3 Series / E30 Cabriolet, lowering the front axle between 25 - 90 mm, and rear between 25 - 60 mm. Dedicated for the years of: 11/82 - 05/93, for the engine version: 318i / 320i / 325i.

Coilover Kit MTS Technik for BMW 3 Series / E30 Sedan, lowering the front axle between 25 - 90 mm, and rear between 25 - 60 mm. Dedicated for the years of: 11/82 - 01/91, for the engine version: 315 / 316 / 316i / 318i / 318is / 320i / 323i / 325i / 325e / 324d / 324td

Coilover Kit MTS Technik for BMW 3 Series / E30 Coupe, lowering the front axle between 25 - 90 mm, and rear between 25 - 60 mm. Dedicated for the years of: 11/82 - 01/91, for the engine version: 315 / 316 / 316i / 318i / 318is / 320i / 323i / 325i / 325e / 324d / 324td.

Coilover Kit MTS Technik for BMW 3 Series / E30 Kombi, lowering the front axle between 25 - 90 mm, and rear between 25 - 60 mm. Dedicated for the years of: 11/82 - 05/93, for the engine version: 316i / 318i / 320i / 325i / 324td.

 2 year warranty with no mileage limit to confirm high quality.

 Suspension components characterized by increased corrosion resistance and made of the highest quality materials.

 The use of twin-tube technology guarantees stable shock absorber performance.

 Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.

 Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.

 Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.

 Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.

 Coilover springs made by Eibach, the world leader in the sport springs industry.

CAR:

Make	BMW
Model	3 Series / E30 Cabriolet / E30 Sedan/ E30 Coupe / E30 Kombi
Type	E30
Engine	318i / 320i / 325i/315 / 316 / 316i / 318i / 318is / 323i / 325i / 325e / 324d / 324td 315 / 316 / 316i / 318i / 318is / 320i / 323i / 325i / 325e / 324d / 324td 316i / 318i / 320i / 325i / 324td
Year	11/82 - 05/93

TECH SPECS:

Series:	street
Max. Axle Load FA:	865 kg
Max. Axle Load RA:	1030 kg
Lowering FA:	25 - 90 mm
Lowering RA:	25 - 60 mm
Coilover Main Spring (Front):	Spring rate (60 N/mm)
Coilover Helper Spring (Front):	Spring rate (20 N/mm)
Coilover Main Spring (Rear):	Spring rate (46 - 90,1 N/mm)
Info:	original front axle struts need to be sent in advance, strut diameter at the front axle of 45 mm
TUV Certificate:	yes
Download instruction:	Download instruction
Download installation manual:	Download installation manual
Download the struts shipping instruction:	Download the struts shipping instruction

PRODUCT NOTES

3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).

8 - Not for 4x4.

21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.

24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.

26 - Independent height adjustment at the lower brackets on the front dampers.

28 - Set includes 2x upper "camber plates" on the front axle.

33 - Including M-Technik.

35 - Rear thread adjustment block is mounted on the top.

64 - 

After the purchase, the original front axle struts should be sent to the headquarters of MTS Technik. Prior to shipment, all elements such as hubs, bearings, covers, shock absorber inserts, bolts and nuts should be dismantled. If the axle struts are delivered without prior disassembly of the above-mentioned parts or if MTS Technik finds any damage, such as broken column bolts, the axle struts will be returned or an additional fee will be charged.

68 - 

After welding the customer-supplied axle struts and MTS Technik coilover suspension, the product is personalized according to the customer's needs. Thus, the right to withdraw from the conclusion of a distance sales contract is excluded (no possibility of returning the goods).

69 - 

The axle struts delivered to us will be cleaned of paint, welded and then secured with zinc. Please provide the original axle struts with the original paint, even if it is in poor condition. Please do not paint the axle struts before shipping!

THE IMAGE/S OF THIS PRODUCT MAY BE EXACT OR GENERIC AND ARE INTENDED FOR ONLINE VISUAL REFERENCE ONLY AND MAY NOT REFLECT THE ACTUAL CONTENTS, ACCESSORIES OR CONFIGURATION OF THE PRODUCT.
GENERALLY ALL KITS WILL INCLUDE NECESSARY ITEMS TO INSTALL OR RE-USE ORIGINAL PARTS INCLUDING BOLTS, SCREWS, ETC. FOR INSTALLATION. IF YOU ARE UNSURE PLEASE CONTACT US PRIOR TO PURCHASING.