MODE x BMS Ultimate Water Injection Kit WMI w/ Stealth Tank for BMW M3 F80 M4 F82 M2 Competition F87 S55

Water/Methanol/Alcohol injection commonly referred to as WMI is a system that allows Water, Methanol or Alcohol to be injected into the pre-throttle system to allow for higher octane and cooler intake temps while still running pump fuel such as 98 RON. WMI can also be added with flex fuel systems and E85 build for further cooling and octane benefits.

WHY DO I NEED IT?

WMI will allow an engine to make greater amounts of power on pump gas such as 98 RON. The effect is similar to running 100 octane race gas or E85 fuel all the time with the additional cooling benefits allowing for more power than you can make on race gas or E85 alone.

MODE x bootmod3 Compatible.

The key to a safe and effective WMI setup is tuning integration. The MODE x BMS WMI kit is the only system available that will easily integrates with the MODE x bootmod3 ultimate tuning bundle without any additional controllers being required to operate the WMI system.

The MODE x BMS Ultimate WMI kit includes a high quality Aquatec WMI pump made to our specifications, high speed solenoid with leak-free compression fittings, a WMI filter, and all required wiring and mounting hardware and an F-chassis specific stealth tank for a fully hidden/clean install.

MODE x BMS Ultimate Water Injection Kit Includes:

• Aquatec 220psi WMI Water Meth Injection Pump

• Burger Motorsports Tee Fitting

• Burger Motortsport Dual Nozzle Holders

• Burger Motorsports Dual BM5 WMI Nozzles (Stock Turbos)

• Burger Motorsports Dual BM7 WMI Nozzles (Upgraded Turbos)

• Burger Motorsports BMW WMI Stealth Tank (Suit BMW M3 F80 / M4 F82)

• Burger Motorsports WMI Solenoid

• Methanol Injection Line 1/4"  (9 Metres / 30 feet)

• Devilsown Methanol Injection Check Valve 1/4" Tube (Part no. 3031)

• Devilsown Methanol Injection Filter 1/4" Tube (Part no. 2218)

• AEM V2 Standard WMI Controller Kit (Part no. 30-3304)

• Macht Schnell Boost Metering Block (Part no. 10.25.100)

• Fitting & Wiring Kit (Straight and 90 degree Injector fittings for different installation setups for chargepipe or boost pipe injection)

INSTALLATION:

Installation of any WMI solution is extensive and must be carried out by highly qualified technicians only.

WARNING: Improper installation may cause irreversible engine damage.

Please Click Here to locate a dealer in your area.

INSTALLATION TIPS:

1. This is a great time to upgrade your charge pipes as they will be required for the meth injection nozzles to be installed.

APPLICATIONS:

• BMW M3 F80 (2014-2018)

• BMW M3 F80 Competition (2016-2018)

• BMW M4 F82/F83 (2014-2020)

• BMW M4 F82/F83 Competition (2016-2020)

• BMW M4 GTS (2016)

• BMW M2 CS (2020)

• BMW M2 Competition F87 (2018-2020)

ATTENTION: MODE Auto Concepts assume no liability on the use or improper installation of this product. Product is for off-road / racing use only.

BMS 3 gal. STEALTH TANK

BMS stealth tank
With our 3 gallon stealth tank the WMI pump mounts directly to the tank and the entire assembly fits cleanly within the existing trunk cavity in your F3X or F8X vehicle below the trunk floor. Works with all DDP 5800 pumps. Made in USA.

Comes with standard 2 way vented black plastic cap.
Upgraded billet lid with 1-way check valve available below.

Tank dimensions: L 26.75" x W 9.75" X H 7.5"

Applications
• 2015+ F80 M3
• 2015+ F82 M4 (does not fit convertible)

CAP UPGRADE

Optional Upgraded Billet WMI tank cap w/safety check valve

This high quality custom billet WMI cap includes an integrated check valve to let air in and prevent dangerous WMI vapor/fumes from getting out! Made in USA.

Applications
• BMS 1 gallon tank
• BMS 2 gallon universal tank
• BMS 2 & 3 gallon stealth tank

INSTALL GUIDE