MTS Technik Street Suspension - Adjustable Coilovers w. Eibach Springs for BMW 7 Series E65
来自 MTS Technik
Rs. 86,300.00
库存量单位 MTSGWBM30 (61508014)
Coilover KitBMW 7 Series E65
Coilover Kit MTS Technik for BMW 7 Series / E65, lowering the front axle between 40 - 75 mm, and rear between 30 - 80 mm. Dedicated for the years of: 07/01 - 12/09, for the engine version: 730i, Li / 735i, Li / 740i, Li / 745 i, Li / 750i, Li / 760i, Li / 730d / 730 Ld / 740d / 745d .
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.
CAR:
Make |
BMW
|
Model |
7 Series / E65
|
Type |
E65
|
Engine |
730i, Li / 735i, Li / 740i, Li / 745 i, Li / 750i, Li / 760i, Li / 730d / 730 Ld / 740d / 745d
|
Year |
07/01 - 12/09
|
TECH SPECS:
Series: | street |
Max. Axle Load FA: |
-1295 kg
|
Max. Axle Load RA: |
-1410 kg
|
Lowering FA: |
40 - 75 mm
|
Lowering RA: |
30 - 80 mm
|
Coilover Main Spring (Front): |
Spring rate (80 N/mm)
|
Coilover Helper Spring (Front): |
Spring rate (20 N/mm)
|
Coilover Main Spring (Rear): |
Spring rate (84 N/mm)
|
Coilover Helper Spring (Rear): |
Spring rate (20 N/mm)
|
TUV Certificate: |
yes
|
Download instruction: | Download instruction |
Download installation manual: | Download installation manual |
Download TUV Certificate: | Download TUV Certificate |
PRODUCT NOTES
2 - Front and rear axle height adjustable (threaded shock absorber housing).
12 - Only for vehicles without EDC.
17 - Only for vehicles without electronic damping.
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
33 - Including M-Technik.
39 -
Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case.
40 -
Installation is also possible on vehicles equipped with NIVO / factory pneumatic suspension. In this case the assembly is possible only after the disassembly of the factory pneumatic system. In some cases, it may be necessary to use additional OEM Audi parts.
MATCHES TO
Make | Model | Engine | Year |
BMW |
7 Series / E65
|
730i, Li / 735i, Li / 740i, Li / 745 i, Li / 750i, Li / 760i, Li / 730d / 730 Ld / 740d / 745d
|
07/01 - 12/09
|