MTS Technik Street Suspension - Adjustable Coilovers w. Eibach Springs for BMW 5 Series E39 10mm-40mm
$1,524.99
Part No. MTSGWBM35 (61508018)
Coilover Kit BMW 5 Series E39 10mm-40mm
Coilover Kit MTS Technik for BMW 5 Series / E39 Kombi, lowering the front axle between 20 - 70 mm, and rear between 10 - 40 mm. Dedicated for the years of: 09/96 - 06/04, for the engine version: 520i / 523i / 525i / 528i / 530i / 540i / 520d / 525d / 525tds / 530d.
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.
CAR:
| Make |
BMW
|
| Model |
5 Series / E39 Kombi
|
| Type |
E39
|
| Engine |
520i / 523i / 525i / 528i / 530i / 540i / 520d / 525d / 525tds / 530d
|
| Year |
09/96 - 06/04
|
TECH SPECS:
| Series: | street |
 Max. Axle Load FA:
|
-1095 kg
|
|
Max. Axle Load RA:
|
-1410 kg
|
| Lowering FA: |
20 - 70 mm
|
| Lowering RA: |
10 - 40 mm
|
| Coilover Main Spring (Front): |
Spring rate (70 N/mm)
|
| Coilover Helper Spring (Front): |
Spring rate (20 N/mm)
|
| Coilover Main Spring (Rear): |
Spring rate (120 N/mm)
|
| Coilover Helper Spring (Rear): |
Spring rate (5,66 N/mm)
|
| Info: |
Dedicated for cars with and without nivo. It enables conversion from nivo to springs with height adjustment.
|
| TUV Certificate: |
yes
|
| Download instruction: | Download instruction |
| Download installation manual: | Download installation manual |
| Download TUV Certificate: | Download TUV Certificate |
PRODUCT NOTES
8 - Not for 4x4.
12 - Only for vehicles without EDC.
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
34 -
Vehicles equipped with EDC and / or V8 engines will need additional OE parts. FRONT AXLE: dome bearing (BMW part: 31331091709), washer (BMW part: 31331116983), sealing washer (BMW part: 31331110196). REAR AXLE: supporting bearing (BMW part: 33521091710), supporting pot (BMW part: 33521090282), washer (BMW part: 33521092986).
MATCHES TO
| Make | Model | Engine | Year |
| BMW |
5 Series / E39 Kombi
|
520i / 523i / 525i / 528i / 530i / 540i / 520d / 525d / 525tds / 530d
|
09/96 - 06/04 |