MTS Technik Street Suspension - Adjustable Coilovers w. Eibach Springs for BMW 8 Series E31 (*Weld In)
$1,524.99
Part No. MTSGWBM48 (60708011)
Coilover Kit BMW 8 Series E31 (*Weld In)
Coilover Kit MTS Technik for BMW 8 Series / E31, lowering both axles between 25 - 75 mm. Dedicated for the years of: 01/90 - 12/99, for the engine version: 840i / 840Ci / 850i / 850Ci / 850Csi.
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.
CAR:
| Make |
BMW
|
| Model |
8 Series / E31
|
| Type |
E31
|
| Engine |
840i / 840Ci / 850i / 850Ci / 850Csi
|
| Year |
01/90 - 12/99
|
TECH SPECS:
| Series: | street |
 Max. Axle Load FA:
|
-1150 kg
|
|
Max. Axle Load RA:
|
-1200 kg
|
| Lowering FA: |
25 - 75 mm
|
| Lowering RA: |
25 - 75 mm
|
| Coilover Main Spring (Front): |
Spring rate (80 N/mm)
|
| Coilover Helper Spring (Front): |
Spring rate (20 N/mm)
|
| Coilover Main Spring (Rear): |
Spring rate (84 N/mm)
|
| Info: |
strut diameter at the front axle of 55 mm
|
| TUV Certificate: |
no
|
| Download instruction: | Download instruction |
| Download installation manual: | Download installation manual |
PRODUCT NOTES
3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
29 - The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual.
33 - Including M-Technik.
36 - Rear thread adjustment block is mounted on the bottom.
MATCHES TO
| Make | Model | Engine | Year |
| BMW |
8 Series / E31
|
840i / 840Ci / 850i / 850Ci / 850Csi
|
01/90 - 12/99
|