MTS Technik Street Suspension - Adjustable Coilovers w. Eibach Springs for BMW Z4 E89

Coilover Kit BMW Z4 E89

Coilover Kit MTS Technik for BMW Z4 Roadster / E89, lowering the front axle between 15 - 50 mm, and rear between 10 - 40 mm. Dedicated for the years of: 02/09 - 08/16, for the engine version: sDrive 18i / sDrive 20i / sDrive 23i / sDrive 28i / sDrive 30i / sDrive 35i / sDrive 35is.

 2 year warranty with no mileage limit to confirm high quality.

 Suspension components characterized by increased corrosion resistance and made of the highest quality materials.

 The use of twin-tube technology guarantees stable shock absorber performance.

 Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.

 Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.

 Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.

 Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.

 Coilover springs made by Eibach, the world leader in the sport springs industry.

CAR:

Make	BMW
Model	Z4 Roadster / E89
Type	E89
Engine	sDrive 18i / sDrive 20i / sDrive 23i / sDrive 28i / sDrive 30i / sDrive 35i / sDrive 35is
Year	02/09 - 08/16

TECH SPECS:

Series:	street
Max. Axle Load FA:	-870 kg
Max. Axle Load RA:	-1000 kg
Lowering FA:	15 - 50 mm
Lowering RA:	10 - 40 mm
Coilover Main Spring (Front):	Spring rate (24 - 47,5 N/mm)
Coilover Main Spring (Rear):	Spring rate (45 - 82 - 110 N/mm)
TUV Certificate:	no
Download instruction:	Download instruction
Download installation manual:	Download installation manual

PRODUCT NOTES

3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).

21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.

24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.

33 - Including M-Technik.