跳至内容
Contact carrier directly for shipping updates 📲 🚚- > Click HERE for March Discounts! 😉
Contact carrier directly for shipping updates 📲 🚚- > Click HERE for March Discounts! 😉

MODE PlusTrack Wheel Spacer Kit 12.5mm for Ford Focus & Fiesta

来自 MODE Design
节省 20%
原价 ¥1,034.00
现价 ¥826.00
库存量单位 MP-6-4508-634-ET215-12 / K56CES-12150BGR
可用性: Translation missing: zh-CN.general.icons.icon_check_circle图标 4库存,随时可以发货

有货时通知我

MODE PlusTrack Wheel Spacers allow the owner to improve the stance of their vehicle, increase the vehicle track width for better handling and performance and fit larger brakes.

MODE PlusTrack Wheel Spacers are made of 7075-T6 Aluminium, the same stuff used in aerospace engineering to make turbine jet impellers! 7075-T6 Aluminium alloy has a much higher strength-to-weight ratio than traditionally used 6061-T6 which makes MODE PlusTrack Spacers the lightest and strongest spacers on the market!

PlusTrack Wheel Spacer kit Contents:

  • (2x) 12.5mm PlusTrack Wheel Spacers
  • (10x) Extended-Thread (Length) Black Spline Wheel Nuts
  • (1x) Spline Wheel Nut Key 

Note: This kit can be installed by fitting supplied ET Wheel Nuts (Included) or by fitting Extended Wheel Studs (Not included).

PlusTrack Wheel Spacer Features

  • 7075-T6 Aerospace Aluminum
  • Increase Vehicle Wheel Track Width
  • Hub-Centric Chamfered Design
  • Pocketed to Reduce Weight
  • Easy-Release Points for Quick Removal
  • Anodised Anti-Corrosion Black Coating
  • High-Tensile 10.9 Grade Wheel Nuts
  • Anti-Corrosion Zinc Coated Black Wheel Nuts
  • Wheel Spacers & Nuts Strength Tested to ensure Quality
  • LIFETIME Structural Warranty

 

Included with our PlusTrack Wheel Spacer Kits are a full set of extended lug nuts. All wheel fasteners are hardened and tempered to strength class 10.9 or 10 according to DIN/ISO standard 898 and meet the statutory requirements of all countries - including the US & Australia.

Note: Wheel spacers that measure 2mm to 8mm in thickness use a Pass-Through Hub Design and may not allow the original wheel hub to protrude through the wheel spacer to maintain hub-centric wheel fitment. Before ordering, please measure the original hub height and subtract the desired spacer thickness from this measurement (eg. OE hub height 12mm, desired wheel spacer 8mm = 4mm remaining hub protrusion). Adhering to this step will ensure that your vehicle will have adequate hub engagement with the center of the wheel and will ensure a vibration free ride in your vehicle.

 

This Part Fits the Following Vehicles


Make Model Submodel Engine
Ford
Fiesta
MK IV
All
Ford Fiesta MK V All
Ford Fiesta MK VI All
Ford Fiesta MK VII All
Ford Focus MK I All
Ford Focus
MK II All
Ford Focus
MK III All
Ford Focus
MK IV All
Ford Kuga All All
Ford Mondeo All All
Ford Puma All All
Ford Escape 2012-present All